Wire rope lanyard assemblies are generally used to attach quick-release pins to a fixture or frame to prevent the pins from being misplaced while they are not in use. All lanyard assemblies listed in this section are made from 7x7 aircraft cable and are coated in a green nylon jacket. Common termination variations such as loops, tabs, and stake eyes are available in either 6" or 12" lengths. Wire rope lanyards may be assembled onto Innovative's extensive line of standard quick release pins such as positive locking pins, detent pins, lynch pins, and wire lock pins. 

Minimums Apply.

For quantities less that 100 pcs, please click on a distributor link below.

Link to http://www.grainger.com
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 

Item #

Wire Material

Jacket Material

Coated Diameter

Usable Length

Termination "A"

Termination "B"

Loop/Loop 6" Wire Rope Lanyards N/A Stainless Steel N/A Nylon - Green N/A .063 N/A 6" N/A Loop N/A Loop
Loop/Loop 12" Wire Rope Lanyards N/A Stainless Steel N/A Nylon - Green N/A .063" N/A 12" N/A Loop N/A Loop
Loop/Stake Eye 6" Wire Rope Lanyards N/A Stainless Steel N/A Nylon - Green N/A .063" N/A 6" N/A Loop N/A #10 Stake Eye
Loop/Stake Eye 12" Wire Rope Lanyards N/A Stainless Steel N/A Nylon - Green N/A .063" N/A 12" N/A Loop N/A #10 Stake Eye
Loop/Tab 6" Wire Rope Lanyards N/A Stainless Steel N/A Nylon - Green N/A .063" N/A 6" N/A Loop N/A 1/4" ID Hole in Tab
Loop/Tab 12" Wire Rope Lanyards N/A Stainless Steel N/A Nylon - Green N/A .063" N/A 12" N/A Loop N/A 1/4" ID Hole in Tab
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1